新萄京棋牌官网
www.89733.com

最新研发产物:生猪U型液压打毛机 羊液压打毛机 羊扯皮机 生猪活挂机 主动卸猪器 坡式提拔机  猪剥皮机 100型猪刨毛机 200型猪刨毛机 300型猪刨毛机 卸猪机预剥运送机 桥式劈半锯 四分体锯 手动劈半锯 生猪打蹄机 猪头刨毛机 手动麻电器  猪同步卫生检疫运送 立式洗猪机 牛液压扯皮机 牵牛机 气动翻板箱 牛落地卫检 牛洗肚机 七工位九工位步进运送机   起落操纵站台 V型运送机 坡式预剥线    猪牛羊屠宰装备流水线 屠宰机器 屠宰配件 整套宰杀装备 驴马屠宰生产线

技术文章
  • 猪屠宰装备主动燎毛炉的利用手艺阐明新葡萄亰娱乐场网址
    公布日期 2018-3-25 9:17:24

     燎毛是我公司近来经心开辟的用于牲猪毛后去除毛的装备经实验利用明其机能、服从、自化和可靠水平完整契合高效、持续的需求,并达到屠宰行业卫准要求,其完善的利用机能具有海内领先程度,是今朝海内大、中型牲猪屠宰选装备

    LML-I Type Auto-singeing oven is especially designed for the pig fine hair removing. It was testified of high efficiency/high automation and trustable which is already measure up to the hygienic standard in the slaughtering industry. It is advanced in China and is the best choice for the large and medium-sized slaughtering plant.

    装备体、排、自掌握、火焰射等安装成。

    It is composed with the oven body, air discharge device, auto-control system, flame spraying device and so on.

    装备接纳、燃、机器于一体,实现了局部自化作。牲猪颠末蒸汽毛、螺旋毛机毛工序后,由运动导轨牵入自燎毛,猪胴体入后,监测便出信指令电气元件事情打气阀门,此时喷头喷出火焰猪胴体行燎毛,完成后猪胴体经导轨,火焰自行小只留火很好的解了以往野生燎毛的事情hig、服从低下、燎毛不等缺点。

    It combined electricity; gas and mechanization into one which made the full automation come true. The pig will lead into the auto-singeing oven by the guide rail after the steamed scalding and hair removing. Once the pig come into the oven, the observation system will send signals to the electric elements to turn on the gas valve, and then the nozzle will spray flame to singe the carcass of the pig. The carcass will lead away by the guide rail after the hair removing, and the flame will wane automatically and leaving only the tinder.

    It made up for the deficiency of the manual singeing such as high intensity of labor, poor efficiency, hair remaining and so on.

    1.     主要用途及特性

    Main usage and feature

    1)     装备用处 Usage of the equipment

    LML-I型自燎毛次要是打毛后的猪胴体行燎毛理,去除毛,使猪胴体生无毛。

    LML-I Type Auto-singeing oven is used to remove the fine hair of the pig after hair removing which can made the carcass of the pig more hygienic and clean.

    2)     装备特性 feature of the machine

    A.     燃料:液化石油、自然

    Fuel: liquefied petroleum gas/natural gas

    B.     装备接纳燃走漏警系

    It adopted of gas escape warning system.

    C.     运动导轨水冷却安装。

    Slide guide water cooling device.

    D.     点火装置。

    Auto firing equipment

    E.     猪胴体不染。

    Non-contamination to the carcass

    F.     火焰可Flame adjustable

    G.    束后,自留有火,以制止繁焚烧

    After the singeing, it can leave the tinder automatically, lest the frequency of firing.

     

    2.     合用的范及事情

    Scope of application and running conditions

    1)     围环ambient temperature-10~+40

    2)     定掌握电压值220V±15%围内能可靠事情。Reliable operating value: rating voltage of 220V±15%.

    3.     格型及次要参数

    Product specification and main parameter

    1)     才能 productivity3000/8h

    2)     利用电压Voltage:交换220VAC

    3)     猪需用燃料gas consumption per pig:≤0.18Kg

    4)     外形尺寸external dimension2200×1200×3000mm××高)(L*W*H)

    5)     装备重量weight of equipment800Kg

    6)     形状构造见structure see the attached program

    4.     事情道理

    Operating principle

    牲猪颠末蒸汽毛、螺旋毛机毛工序后,由运动导轨牵入自燎毛,猪胴体入后,监测便出信指令打气阀门,此时喷出火焰猪胴体行燎毛,完成后猪胴体入下一工序,火焰自行小只留火,等候下一猪胴体完成新一燎毛程。

    The pig will lead into the auto-singeing oven by the guide rail after the steamed scalding and hair removing. Once the pig come into the oven, the observation system will send signals to the electric elements to turn on the gas valve, and then the nozzle will spray flame to singe the carcass of the pig. The carcass will lead away by the guide rail to the next process after the hair removing, and the flame will wane automatically and leaving only the tinder waiting for the next carcass.

    5.     安装与调试

    Installation and trial run/ debugging

    1)     安装要求:查抄装备运输过程中能否有磕碰毁伤按工要求做好土建基,然后整机安装于基之上;

    Installation requirement: Check if the equipment was damaged during the delivery, and finish the infrastructure and then install the machine.

    2)     调试装备运行前查抄各部件有没有松动现象,燃能否结实可靠,表能否一般,然后接通源,一切正常后投入使用。

    Trial Run: To check whether the parts are loose, whether the fuel system is firm and reliable, and whether every meter is normal. And then you can turn the power on and put it into use.

    6.     试车trial run

    序打开电开关、冷却水阀门(手)、燃气总阀(手)、半分后按下焚烧开关喷头扑灭,使自燎毛炉处于事情形态查抄各机构运作能否一般。载实验后,无常,方可负载实验

    Turn on the power switch, water cooling valve, fuel valve one by one and then turn on the ignition switch about 30 seconds later. The nozzle will spray flame and the machine will be on the working condition. And then you can check whether it is working normally or not. You can put it into use after the idle operation if there is nothing wrong.

    7.     安全操纵要点

    Rules of safety operation

    1)     禁在储气罐、燃管道周围进行高和有冲性的作

    No high temperature and impact operation around the air tank and the fuel line.

    2)     人操纵,留意燃有没有走漏及走漏警提醒,及采取措施。

    Need a specialist operator to pay attention to the fuel leakage and the alarm, so as to take measures timely.

    3)     事情时应留意各喷头的燃,须要时进调理

    Pay attention to all the nozzles to see if the flame is normal and to adjust them if necessary.

    4)     烧炉进出口及周,制止人接近。

    No entry around the oven.

    5)     干净修保养时,必须炉体冷却确不能被启动挂提醒牌。

    When you want to clean and maintain the oven, make sure that the oven is cooling and can not start up and also hang the warning board.

    6)     事情完后,切断电封闭所有阀门

    Cut all the power and valve off after work.

    7)     操作者机器和器操纵知

    The operator should be acknowledged with mechanical and electric operation.

    8)     操作者熟习自燎毛构造,利用机能,安全程及本等;

    The operator should be familiar with the structure the function and safety rules and the instruction manual, etc.

    9)     操纵人经岗位培,持

    The operator should be trained before working.

    10)  每班作一样平常查抄

    To check the machine before working for each shift

    11)  成立须要的章轨制及安全操纵程。

    The user should set up the safety rules and regulations.

    8.     查抄保护、保及毛病解除办法

    Checking, maintenance and trouble eliminating

    装备前均经查验试运转,但出后能够因为运输装卸等身分而形成失或毛病,因而必须对整机行一次片面查抄,在肯定各都残缺后,方可安装利用。

    The machine was inspected and debugged before sale, but as there might be something wrong during the delivery. So, you should give it an overall check before put it into use.

    本机安装利用后,除平外,按期修,磨损过多的零件以保机械的一般运转

    During the usage, you should check it regularly besides the maintenance, and change the over-worn parts to ensure the normal running.

    的毛病及解除办法鄙人表中做出了具体明,在发明以下毛病请参照下表行。

    The common troubles and the solutions are in the following chart for your reference.

      

    trouble

       

    causes

    solution

    点不着火

    Firing failure

    统内气没

    The air in the system are not discharged completely

    焚烧工夫

    extend the firing time

    小火留不住

    Can not save the tinder

    旁路阀门开

    The side valve is not open enough

     

    阀门开

    To adjust the valve opening

    燎毛不干

    Can not singe the hair cleanly

    喷头烧工夫

    Time of flame is short

    燎毛工夫

    To extend the singeing time

    气阀门封闭喷头仍在燃

    Still flaming after the fuel valve was turned off

    管道存有大批燃

    Some gas was left in the fuel line

    后自

    After the flaming, it will extinguish

    如按以下办法不能解决成绩勿再自觉拆卸,免得毛病范围扩大,与厂业务门联修。

    If you still can not solve the above problems, please do not dismantle it lest making things worse. Please contact the supplier for the repairing.

    9.     maintenance and repair

    查抄中凡不符合要求的均立刻修,整或更零部件。做到以下要求:

    1)     应与原材料机能不异;

    2)     燎毛炉处于事情形态时,不许进行保修。

    You should repair, adjust or change the spare parts if they are unqualified. Please obey the following requirements:

    1) The function of the replaced parts should be the same with the original production.

    2) You should not repair it when it is in the work condition.

    10.  次要易Main vulnerable parts

    次要易件有以下几 The main vulnerable parts are as following

    1)     气喷头Gas blow head

    2)     停止stop valve 1” CF8M.200

    3)     magnetic valve  1” BZCW

    4)     one-way valve 1”

    力表pressure meter 100  00.1MP

www.89733.com
天分认证天分认证进入展现厅 百销通会员百销通会员进入展现厅